Filter
Top Products
(
INSTALLATION STEP 1
WIRING
POWER AND GROUND
To ensure maximum output from your
RUBICON
amplifier, use high quality,
low-
loss power and ground cables and connections. The
RUBICON
amplifiers will
accept up to 4 gauge power and ground cables. Determine from the chart below
the minimum gauge power and ground wire for your application.
up
to
70’
up to 20’
RUB/CON 507/
1
4 or 8 gauge
I
4 gauge only
CIRCUIT BREAKERS AND FUSES
EXTERNAL
Like all audio components, the RUBICON amplifiers must be fused near the
batters. A fuse or circuit breaker must be located within 18” of the batterv. This will
e
*
prevent a fire in the event of a shorted cable. See the chart below to determine the
correct fuse value.
INTERNAL
The
RUBICON
amplifiers are fused with an automotive-type or Maxi-fuse. In the
event of a blown power supply fuse(s), replace with the correct value fuse found in
the chart below. Never replace the fuse with a higher value than what is sup-
plied.
This may result in amplifier damage and will void the warranty!
RUB/CON Amplifier Fuse Values
Amplifier Fuse
Battery Fuse
/
Circuit
Breaker
1
RUB/CON 507/
1
(2) 30
amp automotive
I
80 amp
I
11