Soundstream Technologies 355 Stereo Amplifier User Manual


 
‘.
‘.
16
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
KEY TO
CALLOUTS
Power LED
-
Indicates amplifier power.
Subsonic
/
Hawkins Bass Control Switch
-
Select “SUB SONIC” to
engage the Sub Sonic filter at 13 Hz. Select “HAWKINS BASS CONTROL”
to engage the subwoofer channel’s high pass filter
@I
45 Hz with
+6
dB
boost for optimum bass.
Subwoofer Channel Input Select
-
Selectable inputs; “CH l-4” for non-
fading bass control, “CH 3&4” for front to rear fading bass control.
Channels
3&4
Input Select
-
Selectable inputs from internal (CH
l&2)
or external (CH
38~4
local RCA inputs).
Amp Mode Switch (Channels 1-4)
-
Select “3CH” for bridged mono output
in 3 channel operation (use input channels
1
&
2). Select “5CH” for stereo
output in 5 channel operation.
Inputs
-
Right and left channel RCA inputs for channels
3&4.
Input Level
-
Channels
3&4
input level control.
ltiputs
-
Right and left channel RCA inputs for channels l&2.
Input Level
-
Channels
l&2
input level control.
Sub Input Level
-
Subwoofer channel input level control.
Low Pass Filter Control Adjustment
-
(Subwoofer Channel) crossover
frequency control for the internal low pass filter.
Speaker Connection Terminal
-
Speaker connections for CH l-4
&
Subwoofer Channel.
GND
-
Main ground connection.
Bolt to a clean chassis point in the ve-
hicle.
REMOTE
-
Remote turn-on input from the head unit. Accepts +12V.
+12V
-
Connected to a fuse or circuit breaker, then to the battery’s posi-
tive terminal.
Main Fuse
-
Main power supply fuse.