Filter
Top Products
PASSIVE AND ELECTRONIC CROSSOVERS
Your Granite amplifier is capable of driving a complete subwoofer and
satellite system in the Mixed Mono configuration. However, for the
lowest distortion and the maximum output and sound quality, we
recommend you use electronic crossovers and multiple channels of
amplification. The Granite 110.2 amplifier incorporates an electronic
crossover with outputs. This amplifier, in conjunction with another
amplifier, will competently drive an entire bi-amplified system.
If you plan to use the Granite 110.2 in the Mixed Mono configuration, it
is important to use the appropriate passive crossovers. Below are
charts for 6 and 12 dB/octave crossovers.
6 dB/octave Passive Crossover Chart
Key:
L = high quality (DCR
~1
Ohm) inductor/coil
C = non-polarized 50 V (or greater) capacitor
XXX LOW
81
HIGH PASS DIAGRAMS XXX
I
2 Ohms
I
4 Ohms
I
8 Ohms
FREQ
1
L C
L
C
L
C