Filter
Top Products
11
To transfer the sound from the headset to the
phone
See the phone User guide.
Resetting the headset
Reset the headset if it behaves unexpectedly.
To reset the headset
1
Enter pairing mode.
2
Simultaneously press the power key and the call
handling key until the indicator light is turned off.
For info on how to enter pairing mode, see
Pairing
the headset on page 7.
Battery
A battery that has been infrequently used, or a new one,
could have reduced capacity. It may need to be
recharged a number of times.
When the battery is too low, the indicator light flashes
red and you hear a low beep. If you do not charge the
headset, it automatically turns off.
To check the battery status
Press the power key once shortly.
• one green flash - the battery needs charging.
• two green flashes - the battery is medium full.
• three green flashes - the battery is fully charged.
This is the Internet version of the User's guide. © Print only for private use.