Filter
Top Products
Disc – Various Functions
43
US
xBLACK LEVEL (COMPONENT OUT)
Select the black level (setup level) for the video
signals output from the COMPONENT VIDEO
OUT jacks. You cannot select “BLACK LEVEL
(COMPONENT OUT)” when the system
outputs progressive signal.
x4:3 OUTPUT
This setting is effective only when you set
“TV TYPE” in “SCREEN SETUP” to “16:9”
(page 42). Change this setting to watch 4:3
aspect ratio progressive signals. If you can
change the aspect ratio on your progressive
format (525p/625p) compatible TV, change the
setting on your TV.
Note
This setting is effective only when “P AUTO” or
“P VIDEO” is selected. Press PROGRESSIVE on the
unit repeatedly to select “P AUTO” or “P VIDEO”.
Setting playback options
— CUSTOM SETUP
Use this to set up playback related and other
settings.
Select “CUSTOM SETUP” in the Setup menu.
For details, see “Using the DVD setup menu”
(page 40).
The default settings are underlined.
x PAUSE MODE (DVD VIDEO and DVD-R/
DVD-RW in VR mode only)
Select the picture in pause mode.
x TRACK SELECTION (DVD VIDEO only)
Gives priority to the sound track which contains
the highest number of channels when you play
back a DVD VIDEO on which multiple audio
formats (PCM, DTS, MPEG audio, or Dolby
Digital format) are recorded.
OFF
Set the black level of the output
signal to the standard level.
ON
Raise the standard black level.
Use this when the picture becomes
too black.
FULL
Select this when you can change
the aspect ratio on your TV.
NORMAL
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left and
right sides of the image.
16:9 aspect ratio TV
AUTO
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
FRAME
The picture, including subjects
that do not move dynamically, is
output in high resolution.
OFF
No priority given.
AUTO
Priority given.
MULTI-DISC RESUME:
CUSTOM SETUP
AUTO
PAUSE MODE:
OFF
OFF
TRACK SELECTION:
ON
AUDIO DRC:
continued