Filter
Top Products
4
Card remote commander
Replacing the lithium battery
When the battery becomes weak, the range of
the card remote commander becomes shorter.
Replace the battery with a new CR2025 lithium
battery.
Notes on lithium battery
•Keep the lithium battery out of the reach of
children. Should the battery be swallowed,
immediately consult a doctor.
•Wipe the battery with a dry cloth to assure a
good contact.
•Be sure to observe the correct polarity when
installing the battery.
•Do not hold the battery with metallic
tweezers, otherwise a short-circuit may
occur.
WARNING
The battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.
The corresponding buttons of the card
remote commander control the same
functions as those on the unit.
1 OFF button
2 SOUND button
3 DSPL button
4 VOL button
5 PRST/DISC/FF-REW button
6 ATT button
7 SOURCE button
8 MODE (*) button
9 SEEK/AMS button
When the POWER SELECT switch is set to the B position, the unit cannot be operated with the
card remote commander unless (SOURCE) on the unit is pressed or a cassette is inserted to
activate the unit first.
+ side up
µ
SEEK
AMS
PRST
DISC
VOL
DSPL
MODE
FF
REW
SOURCE
OFF
SOUND
ATT