Sony WM-GX680 Cassette Player User Manual


 
H
I
J
English
Listening to the
Radio
H
1 Press RADIO ON/BAND
to turn on the radio.
2 Press RADIO ON/BAND
repeatedly to select AM,
FM1, or FM2.
3 Press MENU on the main
unit repeatedly and set
“__” ( the cursor) in the
display to TUNE MODE.
4 For manual tuning
1 Press SET to choose
MANUAL.
2 Press TUNE/PRESET +
or – repeatedly to tune
in to the desired station.
Hold down TUNE/
PRESET + or – for a few
sounds to scan for
stations.
For preset tuning
1 Press SET to choose
PRESET.
2 Press TUNE/PRESET +
or – repeatedly to recall
the desired preset
station.
To use preset tuning,
preset stations first (see
“Presetting Radio
Stations”).
To turn off the radio
Press RADIO OFF .
To improve the broadcast
reception
For AM: Reorient the unit
itself.
For FM: Extend the remote
control cord (antenna). If the
reception is still not good,
press MENU repeatedly to set
the cursor in the display to FM
MODE. Then press SET to
choose from “MONO”
(monaural), “LOCAL” or none
(stereo) for best reception.
To operate from the
remote control
To turn on the radio, press
RADIO ON/BAND•OFF for
more than one second (while the
tape is in stop mode only).
To select the band, press RADIO
ON/BAND•OFF for more than
one second while the radio is on.
To tune in or recall a preset
station, press PRESET+ or –.
To turn off the radio, press
RADIO ON/BAND•OFF.
Presetting
Radio Stations
H
You can store radio stations into
the unit’s memory. You can
preset up to 32 stations —12 each
for FM1 and FM2 and 8 for AM
(for the JPn area*, up to 16
stations — 8 each for FM and
AM).
* See “Receiving Stations Outside
Your Country” (Excluding
European, Saudi Arabian, and
Chinese model).
Tuning in to and
Storing Radio Stations
Automatically
(Auto-Memory
Scanning function)
1 Press RADIO ON/BAND to
turn on the radio.
2 Press RADIO ON/BAND
repeatedly to select AM, FM1,
or FM2.
3 Press ENTER until “A”
appears in the display.
The Walkman starts searching
and storing stations.
Then the preset number
appears.
Note
•Do not remove the power sources
until all the stations are stored.
Storing Radio Stations
Manually (Manual-
Memory function)
You can preset the stations in any
order.
1 Press RADIO ON/BAND to
turn on the radio.
2 Press RADIO ON/BAND
repeatedly to select AM, FM1,
or FM2.
3 Press ENTER.
The frequency digits will flash
in the display.
4 Press TUNE/PRESET + or –
repeatedly to tune in to the
desired station and press
ENTER.
The preset number will flash in
the display.
5 Press TUNE/PRESET + or –
repeatedly to select the desired
preset number and press
ENTER.
The station is preset to the
number of your choice.
Notes
•If you cannot complete step 4 or 5
while the indications are flashing,
repeat from step 3.
•If you preset a new station to the
same preset number, the
previously stored station will be
erased.
To cancel the stored
station
Follow the procedure above and
in step 4, instead of tuning in to a
station, press and hold TUNE/
PRESET + or – until “– – – –” is
displayed. Press ENTER while
“– – – –” is flashing. The preset
number will flash in the display.
Press TUNE/PRESET + or –
repeatedly to select the preset
number you want to cancel and
press ENTER.
Receiving
Stations Outside
Your Country
(Excluding European,
Saudi Arabian, and
Chinese model)
1 Press RADIO ON/BAND
to turn on the radio.
2 Press ENTER.
The frequency digits will
flash in the display.
3 Press and hold RADIO
ON/BAND until
“Eur”,“JPn”, or “USA”
flashes.
4 Press RADIO ON/BAND
repeatedly to select “Eur”,
“JPn”, or “USA” and press
ENTER.
5 Tune in to and store
stations as necessary
following the procedure of
“Listening to the Radio”
and “Presetting Radio
Stations”.
Area indication and
frequency range
Area* Frequency range
FM (MHz) AM(kHz)
Eur 87.5 - 108 531 - 1 602
JPn 76 - 90 531 - 1 710
USA 87.5 - 108 530 - 1 710
* Eur :European and other
countries
JPn :Japan
USA:USA, Canada, and Central
and South America
Using the Menu
I
Adjusting playback
modes
To select playback
direction mode
Press MENU repeatedly to set the
cursor in the display to PB
MODE. Then press SET to select
the desired mode.
To play Select
both sides repeatedly s
both sides once d
from the FWD side
To play a tape recorded
with Dolby* B NR system
Press MENU repeatedly to set the
cursor in the display to PB ; NR
(Dobly noise reduction). Then
press SET to show “ ”.
* Manufactured under license from
Dolby Laboratories.
“Dolby”and the double-D symbol
are trademarks of Dolby
Laboratories.
Emphasizing Sound
1 Press MENU repeatedly to set
the cursor in the display to
SOUND.
2 Press SET repeatedly to select
the sound emphasis of your
choice.
RV : Sound Revitalizer.
Emphasizes treble sound.
MB : Mega Bass.
Emphasizes bass sound
(moderate effect).
GRV : Groove.
Emphasizes bass sound
(strong effect).
no message : normal (no
effect).
Note
•If the sound is distorted with the
mode “GRV”, turn down the
volume of the main unit or select
other modes.
Protecting Your
Hearing AVLS
(Automatic Volume
Limiter System)
Press MENU repeatedly to set the
cursor to AVLS in the display.
Then press SET to show “ ”.
To cancel the AVLS
function
Press SET so that “
disappears.
Note
•The AVLS setting will be canceled
when you replace the battery.
Using Other
Functions
I
Locking the Controls
HOLD Function
Slide the HOLD switch in the
direction of the arrow to lock the
controls of the Walkman or the
remote control.
To use the tape counter
The tape counter is displayed on
the main unit during playback,
recording, fast forward, rewind,
and stop (except when the radio
is turned on). The number will
increase when playing back the
FWD side, and decrease when
playing back the REV side. To
reset the counter to “000”, press
ENTER/COUNTER RESET.
Notes
•The tape counter may show some
deviation.
•The tape counter will not be
displayed when the cassette
compartment is empty.
Precautions
For the customers in the
U.S.A. and Canada
RECYCLING NICKEL-
CADMIUM BATTERIES
Nickel-Cadmium batteries
are recyclable. You can help
preserve our environment
by returning your
unwanted batteries to your
nearest point for collection,
recycling or proper disposal.
Note: In some areas the disposal of
nickel-cadmium batteries in household or
business trash may be prohibited.
RBRC (Rechargeable Battery Recycling
Corporation) advises you about spent
battery collection by the following phone
number.
Call toll free number: 1-800-822-8837
(United States and Canada only)
Caution: Do not handle damaged or
leaking nickel-cadmium batteries.
On rechargeable battery
and charger
• Remove the charger unit from the wall
outlet as soon as possible after the
rechargeable battery has been charged.
Overcharging may damage the
rechargeable battery.
• The battery charger and the
rechargeable battery may become
warm during charging, but this is not a
problem.
• Do not tear off the film on the
rechargeable battery.
• Use only the supplied battery charger
to charge the supplied rechargeable
battery.
• Be sure not to short-circuit the battery.
When you carry it with you, use the
supplied carrying case. If you are not
using the case, do not carry the battery
with other metallic objects such as keys,
rings in your pocket.
• If the rechargeable battery is new or has
not been used for a long time, it may
not be charged completely until you
use it several times.
• The nameplate indicating the operating
voltage, power consumption, etc. is
located on the bottom exterior of the
battery charger.
On batteries
• Do not charge a dry battery.
• Do not carry the dry or rechargeable
batteries with coins or other metallic
objects. It can generate heat if the
positive and negative terminals of the
batteries are accidentally contacted by a
metallic object.
• When you do not use the Walkman for
a long time, remove the battery to
avoid any damage caused by battery
leakage and subsequent corrosion.
On the unit
• Do not drop the unit or give a shock to
the unit, or it may cause a malfunction.
• Do not leave the unit in a location near
heat sources, or in a
place subject to direct sunlight,
excessive dust or sand, moisture, rain,
mechanical shock, or in a car with its
windows closed.
• The LCD display may become hard to
see or slow down when using the unit
at high temperatures (above 40˚C/
104°F) or at low temperatures (below
0˚C/32°F). At room temperature, the
display will return to its normal
operating condition.
• If the unit has not been used for long
period of time, set it in the playback
mode and warm it up for a few minutes
before you start using again.
On tapes longer than 90
minutes
We do not recommend the use of tapes
longer than 90 minutes except for a long
continuous recording or playback. They
are very thin and tend to be stretched
easily.
On the remote control
Use the supplied remote control only
with this unit.
On headphones/earphones
Road safety
Do not use headphones/earphones while
driving, cycling, or operating any
motorized vehicle. It may create a traffic
hazard and is illegal in some areas. It can
also be potentially dangerous to play
your headphones/earphones at high
volume while walking, especially at
pedestrian crossings.
You should exercise extreme caution or
discontinue use in potentially hazardous
situations.
Preventing hearing damage
Do not use headphones/earphones at
high volume. Hearing experts advise
against continuous, loud and extended
play. If you experience a ringing in your
ears, reduce volume or discontinue use.
Caring for others
Keep the volume to a moderate level.
This will allow you to hear outside
sounds and to be considerate to the
people around you.
On maintenance
To clean the tape head and
path
Use the cleaning cassette CHK-1W (not
supplied) every 10 hours of use.
Use only the recommended cleaning
cassette.
To clean the exterior
Use a soft cloth slightly moistened in
water. Do not use alcohol, benzine or
thinner.
Clean the headphones/earphones and
remote control plugs and the terminals
periodically with a cotton swab or a soft
cloth as illustrated.
J
Troubleshooting
The sound drops out or comes
with excessive noise.
•Clean the headphones/earphones
and remote control plugs.
The unit does not operate at all.
•Charge the battery or replace the
dry battery with a new one.
•HOLD is activated. Deactivate
HOLD.
Tape operation is not possible.
•Insert a cassette tape.
The volume cannot be turned up.
•If AVLS is on, turn it off.
A beep sounds and recording is
not possible when REC is slid.
•If the tab of the tape is broken off,
cover the tab hole with adhesive
tape.
The display and the operations
are not normal.
•Remove the power sources for 15
seconds or more, and then set
them again.
The radio and playback operates
but recording is not possible.
•This condition may occur when
the battery becomes weak.
Replace or charge the battery.
Specifications
Radio section
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1 710 kHz (North, Central,
and South America)
531 - 1 602 kHz (other countries)
Tape section
Frequency response
(Dolby NR off)
Playback: 40 - 15 000 Hz
Recording/playback: 100 - 8 000 Hz
Output
Headphones (iREMOTE) jack
Load impedance 8 - 300
Input
Microphone (MIC) jack
General
Power requirements
1.5 V
Rechargeable battery
One R6 (size AA) battery
Dimensions (w/h/d)
Approx. 108.4 × 77.7 × 23.0 mm
(4
3
8 × 3
1
8 ×
29
32 inches)
Mass
Approx. 148 g (5.3 oz)
Supplied accessories
Battery case (1)
Stereo headphones or earphones with
remote control (1)
Battery charger (1)
AC plug adaptor (1) (Saudi Arabian
model only)
Rechargeable battery (NC-6WM, 1.2 V,
600 mAh, Ni-Cd) (1)
Rechargeable battery carrying case (1)
Carrying pouch (1)
Stereo microphone (1)
Design and specifications are subject to
change without notice.
Terminals
Terminals
Terminals Terminals
SOUND MODE MODE AVLS MODE
a
NR
PB TUNE FM PB
PRESET
RADIO OFF
SETMENU
TUNE/PRESET +
RADIO ON/
BANDOFF
PRESET +
TUNE/PRESET RADIO ON/BAND
ENTER
ENTER/COUNTER RESET
SET
MENU
Tape counter
HOLD
HOLD
H
1
-
2
-
3
__
-
4
1 -
2 +
-
+
-
1 -
2 +
-
-
-
-
-
-
-
-
-
+
-
-
H
-
*
-
*
-
1
-
2
-
3
-
-
-
-
-
1
-
2
-
3 -
-
4 +
-
-
5 +
-
-
-
-
+ – – – –
- – – – –
-
- +
-
1
-
2 -
-
3
-
4
-
5
-
*
I
-
s
d
;
-
* -
-
1
-
2
-
-
-
-
-
-
-
-
-
-
-
-
I
-
-
-
-
-
-
-
-
- -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
J
-
/
-
/
-
-
-
/
-
/
-
/
-
/
-
/
- -
i
-