Filter
Top Products
22
VPL-PX35/PX40/FX51
<Table 1> <Table 2>
Item Number Data
Remarks
Item Upper byte Lower byte Data Upper byte Lower byte
STANBY 00h 00h Get only
START UP 00h 01h
STARTUP LAMP 00h 02h
POWER ON 00h 03h
STATUS POWER 01h 02h COOLING1 00h 04h
COOLING2 00h 05h
SAVING COOLING1 00h 06h
SAVING COOLING2 00h 07h
SAVING STABY 00h 08h
CONTROL MODE SEL 01h 05h
USER 00h 00h
SERVICE 00h 01h
LAMP TIMER 01h 13h USE TIME 0000h-ffffh*1
ROM VERSION 01h 1Dh MAIN ROM VERSION *2
SC ROM VERSION 01h 1Eh SC ROM VERSION *2
Channel Memory Reset 01h Set only
Status Memory Reset 02h
Set Memory Reset
03h
03h
00h 00h
W/B All Save 04h
W/B Low Save 05h
W/B High Save 06h
Sircs (15bit category) 17h Refer to table 4 _ 00h 00h Set only*3
Sircs (20bit category) 19h Refer to table 5 _ 00h 00h
*1 Example) In case the lamp timer indicates 1000H, return values are [03h] upper byte and [E8h] lower byte.
*2 Example) In case the software version is 1.03, return values are [01h] upper byte and [03h] lower byte.
*3 It is corresponded to single command only.
<Table 3>
Item Number Data
Item Data Upper byte Lower byte
ACK _ 00h 00h
Undefined Command 01h
Size Error 04h
Select Error 01h 05h
Range Over 06h
NAK Not Applicable 0Ah
Check Sum Error 10h
Framing Error 20h
Parity Error F0h 30h
Over Rub Error 40h
Other Comm Error 50h
(VPL-FX51)
(VPL-FX51)
Approximate Return Waiting Times
The await-return time is approx. 50 msec.
n
This is the case, unless the communications
are interfered anyway.