Filter
Top Products
8
EN
Playing
Playing CDsGetting Started
Advanced Playback Operations
Press
) as many times as you
want while playing.
For example, to locate 2 tracks
ahead, press twice.
0 once while playing
0 as many times as you
want while playing.
For example, to locate 2 tracks
behind, press three times.
MEMORY repeatedly until
“MEMORY” disappears in the
display. Then press 0
while holding down ·.
MEMORY repeatedly until
“MEMORY” appears in the
display. Find the point you
want, and press RESET to
reset the tape counter and to
memorize the point.
To locate the memorized
point, press 0 while
holding down ·. (Press 0
only to stop at “0.00.”)
* You can use the Multi-AMS to locate up to the 30th track
after or before the current track.
To locate
the beginning of the next
or succeeding tracks
(Multi-AMS*)
the beginning of the
current track (Multi-AMS*)
the beginning of the
preceding tracks
(Multi-AMS*)
the beginning of a tape
(Auto Play)
a particular point on a
tape (Memory Play)
What happens during Multi-AMS operation
When Multi-AMS is operating, “PLAY” appears. And each
time the deck detects a blank space, the indicated number
decreases by one. After locating the beginning of the
specified track, the counter indication appears again and the
deck starts playing the track.
Previous
track
Current
track
Next
track
: Beginning of track
Notes
• The Multi-AMS function may not work correctly if:
— the blank space between tracks is less than 4 seconds
long.
— the signal strength of the left and right channels are
very different.
— there is a passage of low frequencies or very low
volume within a track.
• Since the counter is not a digital clock, it will differ from
the actual elapsed playback or recording time.
MEMORY
0.00
RESET MEMORY
0·)
R®
§
º
‚
REC MUTE
PAUSE
REC
π
·
OFF
L R
MPX
FILTER
DOLBY NR
BALANCE
CALIBRATION
EJECT MONITOR
REC LEVEL
0
1
2
3
4
5
6
7
8
9
10
MEMORY
CC
B
B
SS
AMS AMS
∏
RESET
COUNTER
L R
CAL REC LEVEL
L R
BIAS
PHONES
U
)
[ ][]
0
[ ] [ ]
0)
Advanced Playback Operations
Locating a Track (Multi-AMS/
Auto Play/Memory Play)
You can locate the following/previous tracks (Multi-
AMS: Automatic Music Sensor) or the beginning of a
tape quickly. You can even locate a specific point
anywhere on a tape.