Filter
Top Products
4
GB
Setting up the
Wireless System
Wireless Transceiver
TV
Wireless
Subwoofer
Audio
cable
1 Connect the audio cable
(supplied) to the Wireless
Transceiver.
2 Connect the other end of
the audio cable to the
AUDIO OUT
/i jack of
the TV.
3 Connect the Wireless
Transceiver to a USB port
of the TV.
~
The wireless transceiver may interfere with
other terminals on TV physically, depending
on the position of USB terminal you
connected.
4 Connect the AC power
cord (mains lead) from the
subwoofer to the AC
power outlet.
~
It is recommended that the Subwoofer is
placed as close as possible to the TV.
5 The subwoofer will
automatically turns on and
the
"/1 indicator lights in
green when the TV is
turned on.
1
2
/ (on/standby) button, indicator
SECURE button
Using the subwoofer
About the power state
The subwoofer will automatically turn
on when you turn on the TV.
The subwoofer will automatically enter
standby mode and the
"/1 indicator
lights in red, when the TV is in standby
mode.
You can also set the subwoofer to
standby mode using the TV’s menu,
while the TV is on.
You can also turn off the subwoofer
using
"/1 button on the subwoofer. The
"/1 indicator will not light up when the
subwoofer is turned off.
About the sound
adjustment
You can adjust the subwoofer level ,
cut-off frequency and phase using TV’s
menu.
Refer to the TV’s instruction manual.