Filter
Top Products
11
GB
Advanced Tuner Operations
Naming the Preset Stations
You can assign a name up to 13 characters long to each
preset station except FM RDS stations. When the
station is tuned in, the station name will appear instead
of the frequency.
1 Press CHAR.
The cursor blinks in the display.
2 Turn TUNING/SELECT to select a character.
3 When the character you want appears, press
CHAR to move the cursor into position for the
next character.
If you make a mistake
Press CHAR repeatedly until the character you want to
change flashes (every time you press CHAR, the next
character flashes). Then turn TUNING/SELECT to
select a new character.
4 Repeat steps 2 and 3 until the station name you
desire appears in the display.
5 Press MEMORY.
“MEMORY” appears along with the lowest
vacant code to indicate that the tuner is ready to
store the station.
6 Press SHIFT and one of the preset buttons to
specify the preset where you want to store the
station name.
Note
The display returns to normal display mode if you stop
assigning names for more than 8 seconds. If this happens,
start again from the beginning.
To see the frequency of the displayed station name
Press DISPLAY repeatedly.
Numeric
buttons
MEMORY SHIFT
DISPLAY
CHAR TUNING/SELECT