Filter
Top Products
9
GB
Storing stations
This section shows you how to store up to 30 of your
favorite FM or AM (MW and LW) stations manually
onto preset codes made up of characters (A, B, or C)
and numbers (1-0), such as A7. You can store up to 10
stations on each of the 3 different letters. You can use
these letters to classify stations according to music
category or station band.
1 Tune in the FM, MW, or LW station you wish to
store.
2 Press MEMORY.
“MEMORY” appears along with the lowest
vacant code to indicate that the tuner is ready to
store the station.
3 Press SHIFT to chose either A, B, or C.
The letter you choose appears in the display.
4 Press a number button (1-0).
The tuner stores the station at the preset code you
specified and the corresponding indicator lights
on the preset calendar.
5 Repeat steps 1 through 4 to store other stations.
RDS Station names are stored automatically
When you preset an RDS station broadcasting station
name information, the station name is automatically
stored at the station preset.
If you want to label the stations
Follow the procedure described in “Naming Preset
Stations” on page 11.
Getting Started
Clearing preset stations
You can erase preset stations one by one.
1 Press MENU.
2 Turn TUNING/SELECT so that “Clear” appears
in the display and press ENTER.
3 Turn TUNING/SELECT so that the preset you
want to erase appears in the display.
4 Press ENTER.
The station is cleared from the preset memory.
The respective indicator on the preset calendar
goes out. (ST-SA5ES only)
z If you want to erase all the preset stations
1 Turn off the power
2 While holding down the number 5 button and
MENU, press POWER to turn on the power.