Filter
Top Products
46
GB
Additional Information
Specifications
Amplifier section
POWER OUTPUT
Stereo mode (8 ohms at 1 kHz, DIN)
120 W + 120 W
(4 ohms at 1 kHz, DIN)
100 W + 100 W
Surround mode
(8 ohms at 1 kHz, DIN)
Front: 120 W + 120 W
Center
a)
: 120W
Rear
a)
: 120 W + 120 W
(4 ohms at 1 kHz, DIN)
Front: 100 W + 100 W
Center
a)
: 100W
Rear
a)
: 100 W + 100 W
a) Depending on the sound field settings and
the source, there may be no sound output.
Total harmonic distortion at 10 watts
Less than 0.05% (with
sound field, tone,
and bass booster
bypassed)
Frequency response
PHONO: RIAA
equalization curve
±0.5 dB
CD, TAPE, MD/DAT,
DVD, TV/LD,
VIDEO 1, 2, and
VIDEO 3:
10 Hz - 50 kHz
+0.5/–2 dB (with
sound field, tone,
and bass booster
bypassed)
Inputs (Analog)
PHONO:
Sensitivity: 2.5 mV
Impedance:
50 kilohms
S/N
b)
: 75 dB (A,
2.5 mV
c)
)
CD, DVD, TAPE, MD/
DAT, TV/LD,
VIDEO 1, 2, and
VIDEO 3:
Sensitivity: 150 mV
Impedance:
50 kilohms
S/N
b)
: 82 dB (A,
150 mV
c)
)
b) 78’ IHF
c) Weighted network, input level
Inputs (Digital)
DVD (coaxial):
Sensitivity: 0.5 Vp-p
Impedance: 75 ohms
S/N: 100 dB (A,
20 kHz LPF)
CD, DVD, TV/LD,
MD/DAT (Optical):
Sensitivity: –
Impedance: –
S/N: 100 dB (A,
20 kHz LPF)
Outputs (Analog) TAPE, MD/DAT
(REC OUT); VIDEO
1, 2 (AUDIO OUT):
Voltage: 150 mV,
Impedance:
10 kilohms
FRONT L/R, CENTER,
REAR L/R,
WOOFER:
Voltage: 2 V
Impedance:
1 kilohms
PHONES:
Accepts low- and
high-impedance
headphones
Outputs (Digital)
MD/DAT (Optical):
Sensitivity: –
Impedance: –
BASS BOOST +6 dB at 70 Hz
Sampling Frequency
48 kHz
EQ BASS:
100 Hz~1.0kHz
(21 steps)
MID:
500 Hz~5.0kHz
(21 steps)
TREBLE:
1.0 kHz~10kHz
(21 steps)
Gain levels:
±10 dB, 1 dB step