Filter
Top Products
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Turning on/off the power for zone 2 (Power) (for STR-DN1050 only)
You can turn on or off the power for zone 2 by the following procedure.
1. Select [Settings] - [Zone Settings] from the home menu.
2. Select [Power].
3. Select [On] or [Off].
Note
The receiver in zone 2 remains turned on even when this receiver is in standby mode (press (on/standby) on the
remote control to turn off this receiver).
When the receiver is in standby mode, the (on/standby) indicator on the front panel lights up in amber if the
receiver in zone 2 is turned on.
AirPlay function is available in main zone only.
Hint
You can also turn on or off the power for zone 2 using ZONE POWER on the receiver.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
221