Filter
Top Products
74
GB
D:\SONY job\STR-DH820_PMRF_02\GB\4266497121\GB05ENJ_STR-DH820-CEL.fm masterpage: Left
STR-DH820
4-266-497-11(2)
• TV+AMP: The sound is output from TV’s
speaker and the speakers connected to the
receiver.
Notes
• The sound quality of the playback equipment
depends on the TV’s sound quality, such as the
number of channels, and the sampling
frequency, etc. If the TV has stereo speakers, the
sound output from the receiver is also in stereo as
that of the TV, even if you play back multi
channel source.
• When you connect the receiver to an image
display equipment (projector, etc.), sound may
not be output from the receiver. In this case,
select “AMP”.
• When you select the input that you have assigned
the HDMI input, sound does not output from the
TV.
x HDMI Assign
Lets you reassign the HDMI input jacks. For
details, see “HDMI input assign” (page 64).
System Settings menu
You can customize the settings of the receiver.
x Auto Standby
Lets you set the receiver switch to standby
mode automatically when you do not operate
the receiver or when there is no signals input to
the receiver.
• ON: Switches to standby mode after
approximately 30 minutes.
• OFF: Does not switch to standby mode.
Notes
• This function does not work when TUNER input is
selected.
• If you use the Auto standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
Operating without
connecting to a TV
You can operate this receiver using the display
panel even if the TV is not connected to the
receiver.
V/v/B/b,
GUI MODE
MENU
RETURN/
EXIT O
AMP