Filter
Top Products
masterpage:Left
lename[E:\SEM_Janet\DATA_STR-
D
E598_revised4\J9050000_2549732151DE598UCA\2549732151\GB04BSC_STR-DE598-
U
CA.fm]
28
GB
model name1[STR-DE598]
[2-549-732-15(1)]
A SW: Lights up when sub woofer selection is
set to “YES” (page 18) and the audio signal is
output from the SUB WOOFER jack.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP A/SP B: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
D ; DIGITAL EX: “; DIGITAL” lights up
when the receiver is decoding signals recorded
in the Dolby Digital format.
“; DIGITAL EX” lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
E ; PRO LOGIC IIx: “; PRO LOGIC”
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. “; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated. However, these
indicators do not light up if both the center and
surround speakers are set to “NO” and you
select a sound field using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding does not function
for DTS format signals or for signals with a
sampling frequency of more than 48 kHz.
F DTS-ES 96/24: “DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 36).
G NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 23–27 for tuner operations.
Note
“RDS” appears for models of area code CEL,
CEK only.
I D.RANGE: Lights up when dynamic range
compression is activated (page 37).
J COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
K OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
L SLEEP: Lights up when sleep timer is
activated.
About the indications in the display
L C R
SL
SB
SSR
LFE
SP A
DIGITALEX
PRO LOGIC IIx
DTS-ES NEO:6
RDS
D.RANGE
STEREO MONO
SLEEP OPT COAX
96/24
SP B
;;
MEMORY
SW
9 8
qs
q
d
q;qa
2143567
GB01COV_STR-DE598-UCA.book Page 28 Thursday, June 23, 2005 4:54 PM