Filter
Top Products
Getting Started
19
GB
2 Move the easy scroll key to select “AMP
REGIST”, then press the key to enter the
selection.
3 If the displayed model name is same as the
model you use, select “Exit”. If a different
model name or “? ? ?” appears, move the
easy scroll key to select “START”, then
press the key to enter the selection.
After “SEARCHING” appears, the model
name appears. Make sure to keep the remote
pointing toward the receiver until the model
name appears. The remote is reset, turns off,
and optimized for the model. The customized
settings of the remote is cleared and reset to
their factory settings.
You can use the SPEAKER SET UP menu to set
the size and distance of the speakers connected
to this system.
1 Press ?/1 to turn on the system.
2 Rotate MAIN MENU to select
“SPEAKER SET UP”.
3 Rotate MENU to select the menu item
you want.
For more information, see “Speaker setup
parameters”.
Notes
• Certain setup parameters may be dimmed in the
display. This means that the selected parameter
is either unavailale or fixed and unchangeable
due to sound field (pages 34–36) or other
settings.
• Some speaker setup items may appear dimmed
in the display. This means that they have been
adjusted automatically due to other speaker
settings. Depending on the settings, you may or
may not be able to adjust certain speakers.
4 Rotate –/+ to select the parameter.
5 Repeat steps 3 and 4 until you have set
all of the items that follow.
Speaker setup parameters
The initial settings are underlined.
xSP EASY SET UP (Speaker easy setup)
•YES
You can set up your speakers automatically
by selecting a pre-defined speaker pattern (see
the supplied “Easy Setup Guide”).
•NO
Select to adjust the settings of each speaker
manually.
xSPEAKER PATTERN
(Speaker setup pattern)
When “SP EASY SET UP” is set to “YES”,
select the speaker setup pattern. Rotate –/+ to
select the speaker setup pattern and press
MEMORY/ENTER to enter the selection.
5: Setting up the speakers
continued