Sony STR-SE381 Stereo Receiver User Manual


 
22
Function
Selects preset numbers.
Selects track numbers.
0 selects track 10.
Selects channel numbers.
Selects track numbers
over 10.
Scans and selects preset
stations.
Selects preset channels.
Skips discs (CD player
with multi-disc changer
only).
Select discs (Mega storage
CD player only except
CDP-C661).
Searches tracks (forward
or backward).
Fastforwards or rewinds.
Skips tracks.
Pauses play or record.
(Also starts recording
with components in
record standby.)
Starts play.
Stops play.
Starts play on the reverse
side.
Sets tape decks to the
record standby mode.
Starts recording when
pressed with ( (or 9
on tape deck).
For buttons not described on previous pages and buttons with names different from the buttons on the main unit.
Remote Button Descriptions
Operates
Receiver
CD player/MD
recorder/DVD
player
TV/VCR/DBS
CD player/
Tape deck/
MD recorder
Receiver
TV/VCR/DBS
CD player
CD player
CD player/
DVD player
Tape deck/MD
recorder/VCR
CD player/
MD recorder
CD player/
Tape deck/MD
recorder/VCR/
DVD player
CD player/
Tape deck/MD
recorder/VCR/
DVD player
CD player/
Tape deck/MD
recorder/VCR/
DVD player
Tape deck
Tape deck
Tape deck/
MD recorder/
VCR
Remote
Button
0-9
>10
CH/PRESET
+/–
D. SKIP
DISC
0/)
=/+
P
(
p
9
r
r + (
Remote
Button
ENTER
TV/VIDEO
VISUAL 1/u
(power)
TV CONTROL
-/- -
POSITION
SWAP
P IN P
JUMP
MASTER VOL
+/–
MUTING
ANT TV/VTR
Operates
TV/VCR/DBS
TV/VCR
TV/VCR/
LD Player/DBS/
DVD player
TV
TV
TV
TV
TV
TV
TV
TV
VCR
Function
Changes channels when
used with 0-9 (Not
applicable with CDP-C661
CD player).
Selects input signal: TV
input or video input.
Turns on or off the power.
Turns on the TV, switches
the input to “TV,” and
sets the remote to operate
the TV.
Selects the channel entry
mode, either one or two
digit (in Europe only).
Changes the position of
the small picture.*
Swaps the small and the
large picture.*
Activates the picture-in-
picture function.*
Jumps back and forth
between the previous and
current channels.
Normally, adjusts the
master volume of the
receiver.
If TV CONTROL was
pressed, it adjusts the
volume on the TV.
Normally, mutes the
sound from the receiver.
If TV CONTROL was
pressed, the sound on the
TV itself is muted.
Selects output signal from
the antenna terminal: TV
signal or VCR program.
* Only for Sony TVs with the picture-in-picture function