Filter
Top Products
50
GB
You can set the receiver to turn off automatically
at a specified time by using the remote.
For details, refer to the operating instructions
supplied with the remote.
RM-LJ312:
Select SLEEP from the RECEIVER menu,
then press the key repeatedly while the
power is on.
RM-LG112:
Press ALT, then press SLEEP repeatedly
while the power is on.
Each time you select or press SLEEP, the
display changes cyclically as follows:
2:00:00 t 1:30:00 t 1:00:00 t 0:30:00 t
OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, select SLEEP from the RECEIVER menu (RM-
LJ312) or press ALT, then press SLEEP (RM-LG112).
The remaining time appears in the display.
Set the SPEAKERS switch according to the
front speakers you want to drive.
Using the Sleep Timer Selecting the speaker
system
Set to To select
A The speakers connected to the FRONT
SPEAKERS A terminals.
B The speakers connected to the FRONT
SPEAKERS B terminals.
A+B The speakers connected to both the
FRONT SPEAKERS A and B terminals
(parallel connection).
OFF No speaker output.