Filter
Top Products
14
Recording from the
radio
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) or TYPE II (CrO2) tapes. The
recording level is automatically adjusted.
1 Press TUNER/BAND to select the
band you want.
2 Turn the jog dial to tune in a preset
station.
p
DOLBY NR
6 6
3
Turn clockwise
for higher
preset numbers.
Turn counter-
clockwise for
lower preset
numbers.
1
2
To listen to non-preset radio
stations
Use manual or automatic tuning in step 2.
For manual tuning, press + or – () or 0
on the remote) repeatedly. For automatic
tuning, press and hold + or – () or 0 on
the remote ).
Tips
•Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play). When the
system is in the Power Saving Mode, the One
Touch Play function does not work.
•You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
•When an FM program is noisy, press
STEREO/MONO so that “MONO” appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
•To improve broadcast reception, reorient the
supplied antennas.
5 4,6
+
=
Listening to the radio (continued)
Preset number*
Frequency
VOLUME
MHz
kHz
ALL DISCS
ß
(Power)
* When only one station is preset, “ONE
PRESET” appears in the display.