Sony MHC-GX470 Stereo System User Manual


 
14
GB
MHC-GX470/RG590S/RG490S/RG290/RG190.GB.2-668-367-12(1)
Using optional audio
components
1
Connect additional audio
component to the AUDIO IN jack
on the unit using an audio
analog cord (not supplied).
2
Turn down the volume.
Press VOLUME – (or turn the VOLUME
control on the unit towards –)
.
3
Select the AUDIO IN function.
Press AUDIO IN
on the unit.
4
Start playing the connected
component.
5
Adjust the volume.
Press VOLUME +/– (or turn the VOLUME
control on the unit)
.
Adjusting the sound
To add a sound effect
To Press
Reinforce the
bass and create
a more powerful
sound
GROOVE
on the unit
repeatedly until “GROOVE”
appears.
Set the surround
effect
SURROUND
on the unit
repeatedly until “SURR”
appears.
Select the preset
sound effect
EQ
repeatedly. To
cancel, press EQ
repeatedly until “EQ OFF”
appears.
To turn on the subwoofer (MHC-GX470/
RG590S/RG490S only)
Press SUBWOOFER
on the unit repeatedly
until “SUB ON” appears. The SUBWOOFER
indicator
on the unit lights up. If you later
disconnect the subwoofer, repeat the procedure
until “SUB OFF” appears. The volume of the
subwoofer is linked to the front speakers.