Filter
Top Products
52
PHONES
SPEAKERS
A
OFF
A+B
B
MEMORY – + – + A.F.D
FM/ AM TUNER PRESET
0
10
MULTI CHANNEL DECODING
OPEN/
CLOSE
MASTER VOLUME
1
9
8
7
2
3
6
5
4
AUDIO SPLIT DIGITAL / ANALOG
1/u
+
ENTER
EQ SUR LEVEL
TUNER CUSTOM SET UP
VIDEOS-VIDEO
L AUDIO R
–
EQ BANK
EQ
2 CH ANALOG DIRECT EQ BANK 5.1CH INPUT
SOUND FIELD PRESET SOUND FIELD
INPUT
SELECTOR
– +
MODE
MODE +/–
SOUND FIELD
PRESET +/–
INPUT SELECTOR
ENTER
MEMORY
Other
Operations
This chapter describes the operations
necessary to store your custom
equalization and surround settings for
instant recall.
Brief descriptions of buttons used to
create custom equalizer settings
EQ BANK button: Press repeatedly to select the equalizer
you want to adjust.
EQ button: Press to select the parameter you want to
adjust in the current EQ BANK equalizer.
MODE +/– buttons: Press to select the sound field.
MEMORY button: Press to memorize a preset sound
field.
SOUND FIELD PRESET +/– buttons: Press to select a
preset sound field.
INPUT SELECTOR control: Rotate to select the source.
Cursor buttons (
/ ): Use to select parameters after
pressing the EQ button.
Jog dial: Use to adjust parameters and select sound fields
(etc.).
Viewing detailed information about the audio source
You can view information about the audio source currently
selected. When a digital audio source is selected, the
sampling frequency and bit rate of the audio signal can also
be viewed. (Items which can be displayed may differ
depending on the source.)
Turn the jog dial counterclockwise to display the audio
information (except during menu operations). Then turn the
jog dial in either direction to scroll the information.
Turning the jog dial immediately after pressing MODE +/–
adjusts surround modes. About two seconds after using
MODE +/– , you can use the jog dial to display the audio
information. Also, after using INPUT SELECTOR, etc., you
can turn the jog dial to display the audio information when
the surround display returns.
Jog dial
Cursor buttons