Filter
Top Products
35
The MD Deck - Recording
Marking track
numbers
The track numbers can be marked as follows:
• Mark the track numbers automatically.
When you record from this system’s CD
(digital recording) or during level-synchro
recording, the track numbers are
automatically marked.
• At any point while recording.
You can mark the track numbers while
recording any sources.
Marking track numbers
automatically while
recording
–– Level-Synchro Recording
The “LEVEL-SYNC” is factory set to ON and
the track numbers are automatically marked.
If “LEVEL-SYNC” is not displayed during
recording, turn it on as follows. Track
numbers are automatically marked when the
input signal is under a certain level for more
than two seconds and then exceeds the
previous level.
(P
1/u
= 0
–
p
) +
+
(P p
g
+
–
6
6
MD p
1
1 Press REC. The MD stands by for
recording.
2 Press PLAY MODE on the remote
until “PGM” and “SHUFFLE”
disappear.
3 Press EDIT, then press +/– on the
remote repeatedly until
“LevelSync ?” appears.
4 Press ENTER/YES on the remote.
“LevelSync ON ?” appears.
5 Press ENTER/YES on the remote
again.
“LEVEL-SYNC” lights up.
6 Press MD ^.
Recording starts.
To stop recording
Press MD p.
=+
(Pp
1 / u
–+
–+
–
+
=+
(Pp
MD p
4,5
3
3
2
continued