Filter
Top Products
10
GB
CMT-M70 4-239-398-11(1) GB
Preset number Frequency
5 Press MEMORY on the remote.
A preset number flashes.
6 Press ./> on the remote
repeatedly to select the preset number
that you want.
7 Press ENTER on the remote.
The station is stored to the selected preset
number.
8 Repeat steps 2 through 7 to preset
other stations.
Tip
Press PLAY MODE/TUNING MODE (or TUNING
MODE/PLAY MODE on the remote) when you want
to stop scanning.
Setting presets through
manual tuning
1 Press FUNCTION repeatedly until
“TUNER” appears in the display.
2 Press TUNER FM or TUNER AM (or
TUNER/BAND on the remote) to select
FM or AM.
3 Press PLAY MODE/TUNING MODE (or
TUNING MODE/PLAY MODE on the
remote) repeatedly until “AUTO” and
“PRESET” disappear from the display.
4 Press TUNING +/– (or m/M on the
remote) repeatedly to tune in the
desired station.
5 Press MEMORY on the remote.
A preset number flashes.
Preset number Frequency
Presetting radio stations (continued)
6 Press ./> on the remote
repeatedly to select the preset number
that you want.
7 Press ENTER on the remote.
The station is stored to the selected preset
number.
8 Repeat steps 2 through 7 to preset
other stations.
Other Operations
To
Tune in a station
with a weak
signal
Stop setting
presets
To change the
preset number
To change the AM tuning interval
(Except for the European, Middle
Eastern and Philippine models)
The AM tuning interval is factory-preset to 9 kHz (or
10 kHz for some areas). To change the AM tuning
interval, tune in any AM station first, then turn off the
system. Press and hold TUNING + and TUNER AM.
When you change the interval, all the AM preset
stations are erased. To reset the interval, tune in any
AM station first, then turn off the system. Press and
hold TUNING – and TUNER AM.
Tips
• The preset stations are retained for about a day even
if you disconnect the mains lead or if a power
failure occurs.
• To improve the reception, adjust the supplied
antennas or connect an external antenna.
Do this
Follow the procedure described in
“Setting presets through manual
tuning”.
Press PLAY MODE/TUNING
MODE (or TUNING MODE/
PLAY MODE on the remote).
Start over from step 2.
1FM1005
PRESET
STEREO
TUNED
MH
z
1FM1005
PRESET
STEREO
TUNED
MH
z