Filter
Top Products
12
GB
To enter track number using the
remote
You can also select the desired track using the
remote during Normal Play (no display).
Press the numeric buttons. The playback
automatically starts.
To enter track number over 10
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To enter track number 30, press >10, then 3 and 10/0.
Programing the CD tracks
— Program Play
You can make a program of up to 25 tracks on
a CD in any order that you want.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 Press PLAY MODE/TUNING MODE in
stop mode repeatedly until
“PROGRAM” appears in the display.
3 Press . or > repeatedly until the
desired track number appears in the
display.
4 Press ENTER/YES on the remote.
The track is programmed.
“Step” appears, followed by the order
number of the track just programmed. Then
the last programmed track number appears,
followed by the total playing time of the
program. If you have made a mistake, you
can clear the last programmed track from
the program by pressing CLEAR on the
remote.
5 To program additional tracks, repeat
steps 3 and 4.
6 Press CD u (or CD N on the remote).
Other operations
To
Check the program
order
Check the total
number of
programmed tracks
Cancel Program Play
Add a track to the end
of the program
Erase the last
programmed track
Playing the CD (continued)
Selected track
number
Playing time of the
selected track
Last programmed
track number
Total playing
time
Do this
Press . or >
repeatedly during Program
Play.
Press TIME on the remote in
stop mode. The total
number of programmed
tracks appears, and then the
last programmed track
number and the total playing
time of the program.
Press CD x, and then press
PLAY MODE/TUNING
MODE repeatedly until
“PROGRAM” and
“SHUFFLE” disappear from
the display.
Do steps 3 and 4 with
Program Play stopped.
Press CLEAR on the remote
in stop mode. Each time you
press the button, the last
programmed track is erased.