Sony CMT-HP7 Stereo System User Manual


 
Optional Components
25
GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A OPTICAL CD DIGITAL OUT
jack
Use a digital optical cable (square, not supplied)
to connect an optional digital component (MD
deck, etc.) to this jack. You can then output
digital sound to that component from this
system.
B MD IN jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck, etc.) to
these jacks. You can then listen to the sound
from the component.
Listening to audio from a
connected component
1
Connect audio cords.
See “Hooking up optional components” on
page 25.
2
Press GAME (MD) on the remote (or
FUNCTION on the unit repeatedly) until
“MD” appears.
Start playing the connected component.
Optional Components
Hooking up optional components
Optional digital component
To the digital input jack
of an optional digital
component
Optional analog component
From the audio output
jacks of an optional
analog component
continued