Filter
Top Products
14
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data
System?
Radio Data System (RDS)* is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal.
Note
RDS may not work properly if the station you tuned
in is not transmitting the RDS signal properly or if the
signal is weak.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS service, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the
display.
To check the RDS information
Each time you press DISPLAY on the remote,
the display changes cyclically as follows:
Frequency t Station name* t Clock
* If the RDS broadcast is not properly received, the
station name may not appear.
Sound Adjustment
Adjusting the sound
Generating a more dynamic
sound
— DSG
You can use the DSG (Dynamic Sound
Generator) function to produce a more
powerful sound.
Press DSG on the remote.
Each time you press the button, the display
changes cyclically as follows:
DSG 1 t DSG 2 t DSG OFF
When DSG is on, “DSG” lights up.
Press DSG on the remote repeatedly to cancel
DSG.
Selecting the surround effect
Press SURROUND on the remote.
“SURR” appears in the display.
Press again to cancel surround effect.
Adjusting the bass
Press BASS + or – on the remote
repeatedly to adjust the bass.
You can adjust the bass in 7 steps (from –3 to
+3).
Adjusting the treble
Press TREBLE + or – on the remote
repeatedly to adjust the treble.
You can adjust the treble in 7 steps (from –3 to
+3).
Tips
• You can enjoy the original sound by setting BASS
and TREBLE to 0.
• You cannot activate DSG and Bass/Treble
adjustment at the same time.