Tape
15
GB
Recording a CD by specifying
track order
— Program Edit
1 Load a recordable tape.
2 Program CD tracks following steps 1 to
6 in “Programing the CD tracks” on
page 9.
3 Press z REC PAUSE/START.
The tape deck stands by to record. The CD
player stands by for playback.
4 Press FM MODE/DIR (REPEAT/DIR on
the remote) repeatedly to select g to
record on one side. Select h to record
on both sides.
5 Press z REC PAUSE/START again.
Recording starts.
Timer-recording radio
programs
To timer-record, you must preset the radio
station (see “Presetting radio stations” on page
10) and set the clock (see “Setting the clock”
on page 7) beforehand.
1 Press CLOCK/TIMER SET on the
remote.
2 Press CLOCK/TIMER SET on the
remote repeatedly until “SET TMR”
appears, then press ENTER.
“ON” appears, and the hour indication
flashes.
3 Set the starting time.
Press PRESET/CLOCK/TIMER + or – on
the remote repeatedly to set the hour,
then press ENTER.
The minute indication begins flashing next.
Press PRESET/CLOCK/TIMER + or – on
the remote repeatedly to set the minute,
then press ENTER.
4 Set the time to stop the recording
following the procedure in step 3.
5 Press PRESET/CLOCK/TIMER + or – on
the remote repeatedly until “RECORD”
appears, then press ENTER.
6 Insert a recordable tape with the side
you want to record on facing up.
7 Press PRESET/CLOCK/TIMER + or – on
the remote repeatedly to tune in the
desired preset station, then press
ENTER.
8 Press ?/1 to turn off the system.
To
Check or change the
setting
Activate the timer
operation
Cancel the timer
operation
Notes
• When you use the recording timer at the same time
as the Sleep Timer, the Sleep Timer setting has
priority.
• You cannot activate the Daily Timer and the
recording timer at the same time.
• If the system is on at the preset time, the timer-
recording will not be activated.
• The volume is reduced to minimum during
recording.
• If the system is in the recording or recording-pause
mode at the preset time, the timer recording will not
be made.
Do this
Turn on the system and then
start over from step 1.
Press CLOCK/TIMER ON/
OFF on the remote until
“REC” appears.
Press CLOCK/TIMER ON/
OFF on the remote until
“REC” and “DAILY”
disappear.