Filter
Top Products
10
GB
Setting presets through
automatic tuning
1 Press TUNER (TUNER/BAND on the
remote) repeatedly to select “FM” or
“AM”.
2 Turn and hold TUNING +/– (or press
and hold TUNING + or TUNING – on the
remote) until the frequency indication
starts to change, then release it.
Scanning stops automatically when the
system tunes in a station. “STEREO” (for a
stereo program) appears.
If the scanning doesn’t stop
Set the frequency of the desired radio
station as described in steps 2 through 5 of
“Setting presets through manual tuning”.
3 Press TUNER MEM (TUNER MEMORY
on the remote).
The preset number starts flashing.
The stations are stored from preset number
1.
4 Press ENTER.
The station is stored.
5 Repeat steps 1 to 4 to store other
stations.
Preset number
Tuner
Presetting radio stations
You can preset up to 30 stations for FM and
AM. You can then tune in any of those stations
simply by selecting the corresponding preset
number.
There are two ways to store the station presets.
To
Automatically tune all of the
stations that can be received in
your area and then store them
manually
Manually tune and store the
radio frequency of your
favourite stations
Method
Automatic Tuning
Preset
Manual Tuning
Preset