Sony CMT-EP303 Stereo System User Manual


 
16
GB
Display
Using the CD display
Press CD/REMAIN on the remote
repeatedly.
The display changes as follows:
During normal play
Elapsed playing time on the current track t
Remaining time on the current track t
Remaining time on the current CD t
Elapsed playing time on the current track t ...
Troubleshooting
Problems and remedies
If you have any problem using this system, use
the following check list.
First, check that the power cord is connected
firmly and the speakers are connected correctly
and firmly.
Should any problem persist, consult your
nearest Sony dealer.
General
The clock indication does not show the correct
time.
A power interruption occurred. Set the clock and
timer settings again.
The clock setting/radio presetting/timer is
canceled.
The power cord is disconnected or a power
failure occurs longer than half a day.
Redo the following:
—“Setting the clock on page 7
—“Presetting radio stations on page 10
If you have set the timer, also redo Waking up
to music on page 15.
There is no sound.
Turn VOLUME clockwise and hold.
The headphones are connected.
Insert only the stripped portion of the speaker
cord into the SPEAKER terminal. Inserting the
vinyl portion of the speaker cord will obstruct the
speaker connections.
There is severe hum or noise.
A TV or VCR is placed too close to the stereo
system. Move the stereo system away from the
TV or VCR.
The timer does not function.
Set the clock correctly.
When you used the Sleep Timer, the Daily Timer
will not turn on the system until the Sleep Timer
turns it off.