Filter
Top Products
9
CD
Programming the CD
tracks
–– Program Play
You can make a program of up to 24 tracks on
a CD in any order that you want.
1 Turn FUNCTION until “CD” appears in
the display.
2 Press PLAY MODE repeatedly until
“PGM” appears in the display.
3 Press CD ./> repeatedly until the
desired track number appears in the
display.
3 243
PGM
4 Press PLAY MODE.
The selected track is programmed.
The selection number appears in the
display.
5 To program additional tracks, repeat
steps 3 and 4.
6 Press CD u (or CD N on the remote).
To
Cancel Program Play
Add a track to the end
of the program
Erase the entire
program
Tips
• The program you made remains after Program Play
finishes. To play the program again, switch the
function to CD, and then press CD u (or CD N
on the remote).
• “--.--” appears in the display when the total program
time exceeds 100 minutes.
Selected track
number
Total playing time
Do this
Press PLAY MODE
repeatedly until “PGM”
disappears from the display.
Do steps 3 and 4 with
Program Play stopped.
Press CD x with Program
Play stopped.
Using the CD display
Press DISPLAY on the remote repeatedly.
The display changes as follows:
During normal playback
Current track number and elapsed playing time
of the track t Current track number and
remaining playing time of the track t
Remaining playing time of the entire CD t
Clock display t Current track number and
elapsed playing time of the track t ......
While the CD is stopped
Total playing time t Clock display t
Current source display t Total playing time
t ......
Note
If the CD contains 25 tracks or more, the remaining
playing time of the current track will appears as
“---.--” for each track starting with the 25th.