Filter
Top Products
Playing CDsGetting Started
11
Playing CDs
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the ≠/± (AMS: Automatic Music Sensor)
buttons or number buttons on the remote. You can also
locate a specific point in a track while playing a disc.
To locate
the next or
succeeding tracks
the current or
preceding tracks
a specific track
directly Z
a point in a track
while monitoring the
sound Z
a point in a track
quickly by observing
the display Z
Note
If “ ” appears in the display, the disc has reached the end
while you were pressing ). Press 0 or ≠ to go back.
Press
± repeatedly until you find the
track
≠ repeatedly until you find the
track
TRACK, the number button of the
track, and then ENTER. When you
locate a track with a number over 10,
press the 10’s digit first, then the 1’s
digit.
) (forward) or 0 (backward) and
hold down until you find the point
) (forward) or 0 (backward) and
hold down until you find the point
during pause. You will not hear the
sound during the operation.
≠/±
TRACK
Number
buttons
=/+
0/)
ENTER
POWER