Sony SCEH-00087 Headphones User Manual


  Open as PDF
of 20
 
Battery level
The right-most icon indicates how much charge remains in the headset.
Blinking: Charging
3 cells: 70%-100%
2 cells: 30%-69%
1 cell: 10%-29%
No cells: Less than 10%
Hint
The battery level indication is available only if you used automatic mode to pair your headset and PS3 system. If
you used Bluetooth® Discovery mode, the headset’s red mic muting indicator will flash every 10 seconds when the
battery is low.
10.2 Notifications
In certain situations, such as headset disconnection, low battery and connection errors, the headset will
displaytextnoticationsonyourmonitor/TV.Thesemessagesareforinformationonly,anddonotrequireany
action. The messages automatically disappear after five seconds. They may look similar to the following:
10.3 HQ mode
Theheadset’sHighQuality(HQ)modeenableswide-bandwirelessvoicecommunicationwiththePS3™
system. It uses the headset’s dual-microphone design to enable proprietary PS3™ system-based noise
cancelling, and provides better radio frequency interference rejection when it is turned on than when it is off.
By default, HQ mode is on when you first pair your headset and PS3™ system.
HQ mode and noise cancellation features are only available for the PS3™ system, not with other Bluetooth
®-
enabled devices or mobile phones.
To turn HQ mode on or off
1 On your PS3™ system’s Home Menu, go to [Settings], then [Accessory Settings] and select [Manage
Bluetooth® Devices].
2 Select the headset from the list of registered devices, press the
button, and then select [Information]
from the options menu.
3 AccessHighQuality(HQ)Mode.
4 Select On or Off.
 previous next