Filter
Top Products
Playing Discs
22
GB
Listening to a CD Using a
Filter (Digital Filter Function)
This player is equipped with a digital filter that eliminates
noise generated during sampling. By selecting type of
filters, you can adjust the sound quality.
You can select “STANDARD” or “OPTION.” (The default
setting is “STANDARD.”)
SCD-XA777ES
1 Press MENU.
2 Turn l AMS L until “D. FILTER” appears in the
display.
3 Press l AMS L.
4 Turn l AMS L until desired filter name
(“STANDARD” or “OPTION”) appears in the display.
5 Press l AMS L.
When you select “OPTION,” “FILTER” appears in the
display.
Characteristics of each digital filter
STANDARD
Provides a wide frequency range and spatial feeling.
OPTION
Provides smooth and powerful sound with clear image
position.
Notes
• Digital filters are effective only when you play a conventional
CD. You cannot select the digital filter when you play a Super
Audio CD.
• According to the disc or connected equipment, there may be no
noticeable effect after switching the filter.
lAMSL
lAMSL
SCD-XA333ES
MENU
MENU
Setting the DIGITAL OUT on/
off
You can set the digital out mode to on (the digital signals
can be output) or off (the digital signals cannot be output).
When you use the DIGITAL (CD) OUT COAXIAL or
DIGITAL (CD) OUT OPTICAL connecter, set the digital
mode to on (“D.OUT ON”). (The default setting is
”D.OUT ON.”)
SCD-XA777ES
1 Press MENU.
2 Turn l AMS L until “D. OUTPUT” appears in
the display.
3 Press l AMS L.
4 Turn l AMS L until desired digital mode
(“D.OUT ON” or “D.OUT OFF”) appears in the
display.
5 Press l AMS L.
Note
When you play a Super Audio CD, this function does not work
and no signal is output from the DIGITAL (CD) OUT connectors.
Selecting the default
playback area
(2 channel playback or multi-channel
playback area)
1 During stop mode, press MENU.
2 Turn l AMS L until “M/2CH SELECT” appears
in the display.
3 Press l AMS L.
The current playback area appears.
4 Turn l AMS L to select desired playback area,
then press l AMS L.
lAMSL
lAMSL
SCD-XA333ES
MENU
MENU