Filter
Top Products
21
GB
Tuner/Sound Adjustment
To change the AM tuning interval
(except for European, Russian and
Saudi Arabian models)
The default setting for AM tuning interval
is 9 kHz (or 10 kHz for some areas).
Use the buttons on the unit to perform this
operation.
1 Press FUNCTION repeatedly to
select AM band.
2 Press "/1 to turn off the system.
3 While holding down TUNING +,
press "/1.
“9K STEP” or “10K STEP” appears in
the display panel.
When you change the interval, all the
AM preset stations are erased.
You can store up to 20 FM and 10 AM
stations as your favorite stations.
1 Tune to the station you want.
2 Press TUNER MEMORY.
3 Press +/– repeatedly to select
the preset number you want,
then press .
“COMPLETE” appears in the display
panel. The station is stored.
To tune to a preset station
Press TUNING MODE repeatedly until
“PRESET” lights up in the display panel.
Then, press +/– repeatedly to select the
preset number you want.
Adjusting the sound
Creating a party
atmosphere
(DJ EFFECT)
Use the buttons on the unit to perform this
operation.
1 Press FLANGER or ISOLATOR.
The selected button lights up and the
effect is activated.
• FLANGER: Create a deep flanging
effect that is similar to the roar of a
jet plane.
• ISOLATOR: Isolate a specific
frequency band by adjusting the
other frequency bands. For example,
when you want to focus on vocal and
etc.
2 Turn DJ CONTROL +/– to adjust
the effect level.
To turn off the effect
Press the selected effect button again.
Presetting radio stations
Preset number
Sound Adjustment
To Do this
Reinforce the
bass and create
a more powerful
sound
Press BASS BAZUCA.
Select a preset
sound effect
Press EQ repeatedly.
To cancel preset sound
effect, press EQ
repeatedly to select
“FLAT”.