Filter
Top Products
5
Hooking up the Turntable
The phono cables and earth lead come attached to the
rear of the cabinet.
1 Connect the cable with the red plug to the right
PHONO IN R input jack on the amplifier and
connect the cable with the white plug to the left
PHONO IN L input jack.
2 Set MM.AMP. on the bottom panel according to
the amplifier connection as follows:
Mains lead hookups
Connect the mains lead to an AC wall outlet after
completing all of the previous connections.
to a wall outlet
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
PHONO
IN
Getting Started
Amplifier
For connection to Set MM.AMP. to
PHONO IN jacks OFF
AUX IN or LINE IN jacks ON
L
R