Filter
Top Products
33
B
Connecting to a power source
You can check the remaining power of the
battery in the display.
t t t t t
Lobatt*
* Beep sounds.
When the battery is depleted, charge the
rechargeable battery or replace the dry
battery with new one.
• Using the rechargeable battery (this page)
• Using the dry battery (page 35)
Notes
• The indicator sections of roughly show the
remaining battery power. One section does not
always indicate one-fourth of the battery power.
• Depending on operating conditions, the indicator
sections of
may increase or decrease.
• When using the rechargeable battery and dry
battery together to extend power, use a fully
charged rechargeable battery and new dry battery.
For the battery life and charging time of the
rechargeable battery, see “Specifications.”
Using the rechargeable
battery
Charge the rechargeable battery
before using it for the first time.
To keep the original battery capacity
for a long time, charge the battery
only when it is completely depleted.
You can use only the following
rechargeable battery for your CD
player.
• NH-14WM (supplied)
1
Squeeze OPEN from both sides to
open the lid of your CD player,
then open the battery
compartment lid inside the player.
1
2
2
Insert the rechargeable battery by
matching the 3 to the diagram in
the battery compartment and
close the lid until it clicks into
place.
Insert the # end first.
Connecting to a power source
(Continued)