Filter
Top Products
The Timer20
GB
Setting the clock
“– –:– –” indication appears in the
display until you set the clock.
The Timer
Before you begin, hook up the system (see pages 25 -
26).
1 Press and hold CLOCK for 2 seconds until the
hour digit flashes.
2 Press TUNING•TIME SET + or – until you set the
current hour. Then press DSPL ENT MEM.
The minute digits flash. Set the minutes by
pressing TUNING•TIME SET + or – until the
correct minute is displayed.
3 Press DSPL ENT MEM.
The clock starts from 00 seconds.
To change the display to the daylight saving time
(summer time) indication
Press and hold SUMMER for 2 seconds.
“SUMMER” appears in the display and the time
indication changes to summer time.
To cancel the summer time indication
Press and hold SUMMER again until “SUMMER”
disappears from the display.
Tip
The time display
system:
24-hour system
CLOCK
DSPL
ENT MEM
TUNING
TIME SET +, –
SUMMER