Basic Operations
Basic Operations
11
GB
3 Start recording.
1 Press r/P.
The 9/( indication in the
display flashes.
2 Press ( (for the front side) or
9 (for the reverse side) on the
TAPE section to select the
recording side of the tape.
Recording will start
automatically.
(On the remote, while keeping
r/P pressed, press ( or 9
on the TAPE section.)
Note
If recording does not start, press
r/P and then ( or 9 again.
Recording from the
radio
Recording from the CD
player
Tips
• Adjusting the volume or
the audio emphasis (see
page 32) will not affect
the recording level.
• When is displayed,
recording will be made
on both sides of the
tape. To record on one
side, press DIR MODE
to display .
• If the MW/LW radio
makes a whistling
sound after you’ve
pressed r/P in step 3,
press PLAY MODE/
MONO/ST/ISS to select
the position that most
decreases the noise.
•
To erase a recording,
proceed as follows:
1 Insert a tape you want
to erase its recording
and press p on the
tape section.
2 On the player: press
r/P and then ( or
9. On the remote:
While keeping r/P
pressed, press ( or
9.
Use these buttons for additional operations
To Press
Stop recording p on the TAPE section
Pause recording r/P
Press the button again to
resume recording.
Turn on/off the player OPERATE
OPERATE
p
r/P
r/P