Filter
Top Products
28
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 3.2-ohm loads, both channels driven from
100 - 10,000 Hz; rated 1.7 W per channel-
minimum RMS power, with no more than 10 %
total harmonic distortion in AC operation.
Other Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about
200 mm from the objective lens surface on the optical
pick-up block with 7 mm aperture.)
Spindle speed
400 r/min (rpm) to 1 000 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20 000 Hz +0/–1 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1 710 kHz
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
General
Speaker
Full range: 8 cm (3
1
⁄4 in.) dia.,
3.2 Ω, cone type (2)
Passive radiator: 8 cm (3
1
⁄4 in.) dia. (2)
Output
Headphones jack (stereo minijack):
For 16 - 64 Ω impedance headphones
Power output
2.3 W + 2.3 W (at 3.2 Ω, 10 % harmonic
distortion)
Power requirements
DC IN 9V jack accepts:
Supplied AC power adaptor for use with 120 V AC,
60 Hz
9 V DC, 6 size C (R14) batteries
Battery life
CD playback
Sony R14P: approx. 2 h
Sony alkaline LR14: approx. 8 h
Radio reception
Sony R14P: approx. 23 h
Sony alkaline LR14: approx. 45 h
Dimensions
Approx. 511 × 154 × 244 mm (w/h/d)
(20
1
⁄8 × 6
1
⁄8 × 9
5
⁄8 inches) (incl. projecting parts)
Mass
Approx. 3.2 kg (7 lb. 1 oz) (incl. batteries)
Supplied accessories
AC power adaptor (1)
CD-ROM (SonicStage) (1)
SonicStage Installation/Operating Guide (1)
US and foreign patents licensed from Dolby Laboratories.
Design and specifications are subject to change without
notice.
Optional accessories
Sony MDR headphones series