Filter
Top Products
15
Tape
7 Press nN to start playing the source to
be recorded.
4 Press CD SYNC. Press REC PAUSE/START.
Deck B stands by for recording.
REC PAUSE/START button flashes.
2 Press CD.
Press CD, TAPE A/B or TUNER/BAND.
Recording to a tape
— CD Synchro Recording/Recording Manually/Program Edit
You can record from a CD, tape or radio. You can use TYPE I (normal) tapes. The recording level is
adjusted automatically.
Steps Recording from a CD
(CD Synchro Recording)
Recording from a CD/tape/radio manually
1 Load a recordable tape into deck B.
3 Load the CD you want to record.
Load the CD/tape, or tune in the station
you want to record.
5 Press DIRECTION repeatedly to select g to record on one side. Select j
(or RELAY) to record on both sides.
6 Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B after step 1. Press
nN to start playback of the reverse side, then
press x when you want to start recording. The
TAPE B reverse side indicator lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Note
You cannot listen to other sources while recording.
continued