Sony MHC-GX470 Stereo System User Manual


 
19
GB
Other Operations
MHC-GX470/RG590S/RG490S/RG290/RG190.GB.2-668-367-11(1)
4
Start recording.
While recording, you cannot listen to other
sources.
For CD Synchro Recording:
Press REC PAUSE/START
. When the
recording is completed, the CD player and
the tape deck stop automatically.
For Manual Recording:
Press REC PAUSE/START
, and then
start playing the desired recording source.
If there is noise while recording from the
tuner, reposition the appropriate antenna to
reduce the noise.
For Sound Mixing:
Press REC PAUSE/START
, and then
start playing the desired source and start
singing or speaking into the microphone.
If acoustic feedback (howling) occurs,
reduce the volume, move the microphone
away from the speakers, or change the
direction of the microphone.
To stop recording
Press
.
Notes
• Recording stops if you change to a different function.
• When loud sound signals are input, the system
automatically adjusts the recording level to prevent
distortion of the recorded sound signal (Auto Level
Control function).
• You cannot eject the disc during CD Synchro
Recording.
Creating your own
sound effect
You can raise or lower the levels of specific
frequency ranges, and then store the setting as
“USER” in the memory.
1
Select the audio emphasis you
want for your basic sound using
EQ, and SURROUND and
GROOVE on the unit
.
2
Press EQ BAND
repeatedly to
select a frequency band, and then
turn the MULTI JOG dial
on the
unit to adjust the frequency level.
Repeat this for each band you want
to adjust.
Frequency band
Frequency level
3
Hold down EQ
until
“COMPLETE” appears.
The setting is stored in the memory.
4
To call up the personal sound
effect, press EQ
repeatedly until
“USER” appears.
To cancel the sound effect
Press EQ
repeatedly until “EQ OFF”
appears.