Filter
Top Products
40
GB
Flashing part of a CD
— CD Flash
With the flash function, you can “flash” the
CD sound during playback. This lets you
create original recordings.
You cannot use this function with VIDEO
CDs.
/ Press and hold CD FLASH during
playback at the point you want to
start the Flash function, and release
to resume normal play.
To adjust the flash length
Turn the jog dial while holding CD FLASH
(or press SELECT 4 or $ while holding
FLASH on the remote) to select different flash
lengths (FLASH 1~20).
To use CD LOOP and CD FLASH
together
Press and hold both CD LOOP (LOOP on the
remote) and CD FLASH (FLASH on the
remote) at the same time.
Notes
•The loop and flash length cannot be adjusted
during this operation. Adjust the loop and flash
lengths independently beforehand if necessary.
•
To record the flash effect, use the analog (MD OUT)
connections or this unit’s tape deck.
Looping part of a CD
— CD Loop
With the loop function, you can repeat part of
a CD during playback. This lets you create
original recordings.
You cannot use this function with VIDEO
CDs.
/ Press and hold CD LOOP during
playback at the point you want to
start the Loop function, and release
to resume normal play.
To adjust the loop length
Turn the jog dial while holding CD LOOP (or
press SELECT 4 or $ while holding LOOP on
the remote) to select different loop lengths
(LOOP 1~20).
Jog dial
DJ Effects
Jog dial
(Power)
(Power)
CD LOOP
CD FLASH