Sony MHC-RG22 Stereo System User Manual


 
Other Features
23
GB
8 Press ENTER on the remote.
The type of timer (DAILY), followed by
the start time, stop time, and the music
source appear, then the original display
appears.
9 Press ?/1 to turn off the system.
Other Operations
To Do this
Check the setting Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly to select
DAILY, then press ENTER
on the remote.
Change the setting Start over from step 1.
Cancel the timer Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly to select
TIMER OFF, then press
ENTER on the remote.
Tip
The system turns on 15 seconds before the preset
time.
Notes
When you use the Sleep Timer, the Daily Timer
will not turn on the system until the Sleep Timer
turns it off.
You cannot activate the Daily Timer and Timer-
recording at the same time.
If the system is on at the preset time, you cannot
activate the Daily Timer.
Waking up to music
Daily Timer
You can wake up to music at a preset time.
Make sure you have set the clock (see Setting
the clock on page 10).
1 Prepare the music source you want to
play.
CD: Load a CD. To start from a
specific track, make a program (see
Programing CD tracks on page 12).
Tape: Load a tape with the side you
want to play facing forward.
Radio: Tune in the preset station you
want (see Listening to the radio on
page 15).
2 Adjust the volume.
3 Press CLOCK/TIMER SET on the
remote.
DAILY SET appears.
4 Press ENTER on the remote.
ON appears and the hour indication
flashes.
5 Set the time to start playing.
Press . or > on the remote
repeatedly to set the hour, then press
ENTER on the remote.
The minute indication flashes.
Press . or > on the remote
repeatedly to set the minute, then press
ENTER on the remote.
6 Repeat step 5 to set the time to stop
playing.
7 Press . or > on the remote
repeatedly until the music source you
want appears.
The indication changes as follows:
t
TUNER
y
CD PLAY
T
t
TAPE PLAY
T