Filter
Top Products
24
To
Check the
program
Clear a specific
track or disc
Clear from the
last track or disc
Add tracks or
discs to the end
of the program
Clear a specific
program
You need to
Press CHECK repeatedly.
After the last track, “END”
appears.
Press CHECK until the track
or disc you do not want
appears, then press CLEAR.
Press CLEAR. Each time you
press the button, the last track
or disc will be cleared.
Follow the programming
procedure.
1 Press PROGRAM repeatedly
until the program number
you want to clear appears.
2 Hold down CLEAR until
“ALL CLEAR” appears.
Programming the CD tracks
(continued)
Tips
•When you press CD fl, you can play the same
program again.
•When you press PROGRAM during Continuous
or Shuffle Play, the program will be played after
the current track.
•If you replace discs, the programmed disc and
track numbers remain until you erase them. So,
the player plays only the existing disc and track
numbers. However, the disc and track numbers
that are not found in the player or on the disc are
deleted from the program, and the rest of the
program is played in the programmed order.
4 To program a whole disc, skip this
step. Press ≠/± until the
desired track number appears.
When the disc you select has a disc title
(For MHC-F100/MHC-FR1 only), it
appears and then switches to the
following display.
5 Press ENTER.
The track is programmed.
6 To program other discs/tracks, do
the following:
7 Press CD fl.
All the tracks play in the order you
selected.
To cancel Program Play
Press CONTINUE.
To program
Other discs
Other tracks on the same disc
Other tracks on other discs
Repeat Steps
3 and 5
4 and 5
3 to 5
Track number
AUTO
ALL
1
DISC
S
PROGRAM
CD TEXT
RELAY
TUNED
1
2
REC
SLEEP
STEREO
MONO
SYNC
STEP
VOLUME
PLUS
1
20
20 3 1
The programmed
disc
Playing order
The programmed track
AUTO
ALL
1
DISC
S
PROGRAM
CD TEXT
RELAY
TUNED
1
2
REC
SLEEP
STEREO
MONO
SYNC
STEP
VOLUME
PLUS
1
20
20 3 1