Filter
Top Products
12
CD
Saving the power in
standby mode
Press DISPLAY repeatedly while the
system is off. Each time you press the
button, the system switches cyclically as
follows:
Demonstration t Clock display t Power
Saving Mode
Tips
• ?/1 indicator lights up even in the Power Saving
Mode.
• The timer functions in the Power Saving Mode.
Note
You cannot set the time in the Power Saving Mode.
To cancel the Power Saving Mode
Press DISPLAY once to show the
demonstration or twice to show the clock
display.
Loading a CD
You can load up to 60 discs into this unit.
Turn on the system before you load CDs.
1 Open the front cover by pushing the
right edge of the cover.
Front cover
2 Turn DISC ACCESS (or press TDISC
or DISCt on the remote) until you find
the disc slot where you want to insert a
disc, while checking the disc number
(written beside every slot and also
indicated in the display).
Disc slot at the loading
position
(located at the very front)
Disc number