![](http://pdfasset.owneriq.net/2/64/264b3933-b152-405d-840f-d66f5d33a752/264b3933-b152-405d-840f-d66f5d33a752-bgb.png)
11
MD COVER ASS’Y
HEAT SINK
1 four screws
(B2 × 3)
3 MD cover ass’y
2 Pushing the Cassette Holder in the direction of the arrow A with a
screwdriver, etc., disengage the Shaft (MD Cover Guide) from
the slot in the MD Cover Assy.
Note: Take care not to scratch the optiocal Pick-up when pushing
the Cassette Holder with a screwdriver. etc.
shaft (MD cover guide)
cassette holder
A
1 three screws
(PTT2.6 × 10)
2 two screws
(PTT2.6 × 12)
1 screw
(PTT2.6 × 10)
C6500R/C6500RX
1 two screws
(PTT2.6 × 10
)
3 heat sink