Filter
Top Products
34
GB
Erasing a group name
Use this function to erase the name of a group.
1 While the deck is stopped, press
GROUP ON/OFF.
The GROUP ON/OFF button lights up.
2 Press GROUP SKIP repeatedly until the
group you want appears.
3 Press MENU/NO.
“Edit Menu” appears in the display.
4 Turn AMS (or press ./>
repeatedly) until “Nm Erase?” appears,
then press AMS or YES.
5 Turn AMS (or press ./>
repeatedly) until “Gp ** (selected group
number)” flashes, then press AMS or
YES.
“Complete!” appears.
Note
You cannot erase the name of a group that does not
have any tracks registered.
This function allows you to create a new group
and register a track or consecutive tracks which
are not already registered into that group. You
can also create groups without registering any
tracks.
1 While the deck is stopped, press
GROUP ON/OFF.
The GROUP ON/OFF button lights up.
2 Press MENU/NO.
“Edit Menu” appears in the display.
3 Turn AMS (or press ./>
repeatedly) until “Gp Create?” appears,
then press AMS or YES.
4 Do steps 4 to 8 of “Naming a track or an
MD using the controls on the deck” on
page 31 or steps 2 to 5 of “Naming a
track or an MD using the remote” on
page 31.
5 Turn AMS (or press ./>
repeatedly) to select the first track you
want to register, then press AMS or
YES.
6 Turn AMS (or press ./>
repeatedly) to select the last track you
want to register, then press AMS or
YES. (When registering only one track,
simply press AMS or YES again without
performing any other operations.)
“Complete!” appears for a few seconds and
the tracks are registered into the new group.
Creating a new group and
registering tracks
— Create Function