Filter
Top Products
19
GB
Timer
7 Press R/r repeatedly until the music
source you want appears.
The indication changes as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
8 Press ENTER.
The start time, stop time, and the music
source appear, then the original display
appears.
9 Turn off the system.
Waking up to music
— Daily Timer
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see “Setting the clock” on page 8).
1 Prepare the music source you want to
play.
• CD: Load a CD. To start from a specific
track, make a program (see “Programming
the CD tracks” on page 10).
• Tape: Load a tape with the side you want
to play facing forward.
• Radio: Tune in the preset station you
want (see “Presetting radio stations” on
page 11).
2 Adjust the volume.
3 Press c/CLOCK SET (or CLOCK/TIMER
SET on the remote).
“SET” appears and “DAILY SET” flashes
in the display.
4 Press ENTER.
“ON” appears and the hour digits flash in
the display.
5 Set the time to start playback.
Press R/r repeatedly to set the hour, then
press ENTER.
The minute indication starts flashing.
Press R/r repeatedly to set the minute, then
press ENTER.
6 Set the time to stop playback following
the above procedure.
To
Check the setting
Change the setting
Cancel the timer
operation
Notes
• When you use the Sleep Timer, Daily Timer will
not turn on the system until the Sleep Timer turns it
off.
• You cannot activate the Daily Timer and the
recording timer at the same time.
Tip
The power turns on 15 seconds before the preset time.
Do this
Press TIMER SELECT (or
CLOCK/TIMER SELECT
on the remote). Press R/r to
select “DAILY SELECT”.
Then, press ENTER.
Start from step 1.
Press TIMER SELECT (or
CLOCK/TIMER SELECT
on the remote). Press R/r to
select “TIMER OFF”.
Then, press ENTER.