Sony LBT-G1300 Stereo System User Manual


 
25
LBT-G1/LBT-G1300. 3-859-546-52. EN
Specifications
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from
70 – 20,000 Hz; rated 32 watts per channel
minimum RMS power, with no more than 0.9
% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Continuous RMS power output
40 + 40 watts
(6 ohms at 1 kHz,
10% THD)
Music power output (North American model only)
75 + 75 W
Peak music power output (except for North
American model) 550 W
Inputs PHONO: 4.4 mV
Outputs PHONES (stereo phone
jack): accepts
headphones of 8 ohms or
more.
SPEAKER: accepts
impedance of 6 to
16 ohms.
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(λ=780 – 790 nm)
Emission duration:
continuous
Laser output Max. 400µW*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Frequency response 40 Hz – 16 kHz (±0.5 dB)
Tape player section
Recording system 4-track 2-channel stereo
Frequency response 60 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
Wow and flutter 0.1% WRMS ±0.3% (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range 87.5 – 108.0 MHz
Aerial FM wire aerial
Aerial terminals 75 ohm unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range North American and
Mexican models: 530 –
1,710kHz (with the
tuning interval set at
10 kHz)
Australian models: 531 –
1,602 kHz (with the
tuning interval set at
9 kHz)
Other models: 531 –
1,602 kHz (with the
tuning interval set at
9 kHz)
530 – 1,710 kHz (with the
tuning interval set at
10 kHz)
Aerial AM loop aerial
External aerial terminals
Intermediate frequency 450 kHz
Speaker
SS-G1300
Speaker system 2-way, bass-reflex type
Speaker units
Woofer: 13 cm dia., cone type
Tweeter: 2 cm dia., PIEZO type
Nominal impedance 8 ohms
Dimensions: Approx. 240 x 420 x
202 mm (9.5 x 16.5 x 8 in)
(w/h/d) incl. projecting
parts and controls
Mass: Approx. 3.1 kg (7 lb 1 oz)
net per speaker
continued